Even G1 Case Upgrade

Step 1: Download Firmware Updater on your Computer

Unzip the .zip file and open EvenGlassboxUpgradeTool.exe inside.

Mac (Compatible exclusively with Apple Silicon M-series processors):

https://cdn.evenreal.co/file/57b5c06d526d0a6b0c5e8b52beb429c4.dmg

 

 

Step 2: Connect your Even G1 Case with your Computer

Use a cable that supports data transfer to connect your Even G1 Case with your computer.

* Note: The original charging cable of Even G1 Case does not support data transfer.

 

Step 3: Follow the On-screen Instructions

Follow the on-screen instructions in the Upgrade Tool.

* Note: DO NOT disconnect the Even G1 Case from the computer during the upgrade process, as it may cause damage to the Even G1 Case!

 

 

 

* Device Salvage for Severe Damage of Even G1 Case

** Note: The Even G1 Case should be considered severely damaged if and only if all the following conditions are met:

• The indicator light doesn't light up while repeatedly opening and closing the case cover.
• When inserting the original cable into the case, the indicator light does not illuminate.
• Even G1 fails to charge and the indicator light remains off when G1 properly placed in the case.

Solution (Compatible exclusively with Windows)

1. Download the upgrade tool from https://cdn.evenreal.co/file/086b35ad13aaf3a1eefa6d9c19c28632.zip.
2. Unzip the .zip file and open EvenG1CaseUpgradeTool.exe inside.
3. Use a cable that supports data transfer to connect your Even G1 Case with your Windows computer.
4. Follow the on-screen instructions, select the file V2.73.bin from the file path: \\EvenG1CaseUpgradeTool\Glasses case firmware, and start upgrade.
5. Wait for the upgrade to complete.